Cya test water is yellow

Waited 24hrs but filter was not on the entire time-only about 40% of time so I think I’ll wait the full 24hr and test again because all the numbers are slightly off where they should be. Here is where the numbers read currently

CYA -40
FC-12.6 (at tail end of slamming the pool after opening for season, letting number drop naturally at this point)
CC-.8
PH-8.0
ALK-purple at 100
Bright pink at 110

If numbers are still off tomorrow after waiting the full 24hrs then I’ll address them

PS Happy to donate-waiting for client payments which are very late🙁
 
  • Like
Reactions: JamesW
Waited several days for things to settle down and these are the pools numbers
CYA -50
FC-6.6 (at tail end of slamming the pool after opening for season, letting number drop naturally at this point)
CC-.4
PH-7.8
ALK-purple at 100
Bright pink at 110
so 110?

Looking good and ready to swim -now we need warm weather to warm it up using the solar panels
 
FC-6.6 (at tail end of slamming the pool after opening for season, letting number drop naturally at this point)
FC target for LC pool with CYA of 50 is 6-8.
I would dose higher, so that when you test, your FC is 7-8. If you have to dose higher, so that when you test, you are 7-8, do that.
 
  • Like
Reactions: proavia
TFP is a registered 501(c)3 non-profit that is maintained by user donations.

The people who answer questions are volunteers.

If you find the site to be a good resource, please consider making a donation to help support the site.

Thanks.