Controller for valve actuators

[rebman]

I'm looking for a simple controller for a few valve actuators I'd like to install. All the ones I've seen are sophisticated and meant to control the entire pool system, including pumps, filters, LEDs, water features, etc. (Aqualink, Intellitouch...)

All I need it to do is activate the actuator at a certain time of day.

Any advice?

 

[Jimrahbe]

r,

You can try this... https://www.poolsupplyunlimited.com...MItKK6luPm4QIVTLjACh2cmA5pEAYYASABEgLDLPD_BwE

Or you can make your own... See this thread.... Controlling a Valve Actuator Remotely

Thanks,

Jim R.

 

[rebman]

Thanks, Jim.

Could I use a 4 station 24VAC sprinkler timer? Attach one wire to ground, one to "station 1" and one to "station 2"? Would that work? Forgive my ignorance on this........

 

[Jimrahbe]

R,

I can't see why not... Seems like it would work to me..

I assume you mean attach ground to the black common wire from the actuator, station #1 to the Red wire and station #2 to the White wire..

Jim R.