Connecting Wireless link to Easytouch with Intellichlor module

[f7McCall]

Per the instructions for the wireless link you are direct to connect outdoor wireless link module to the J20 port or Com port.I purchased the Easytouch with the Intellichlor option. With this option the J20 com port is connected to the Intellichlor board mount in the back of the panel. On the intellichlor board there are two more Com ports J3 and J4. Those ports are 4 wires Red, Yellow, Green and Black. Im 99.9 % sure that where I want to land the wire from the outdoor wireless link module. BUT no where in any manual is this stated. Appreciate any input or experience with this issue

Scott

 

[Jimrahbe]

Scott,

The EasyTouch has only one com port... with several additional connection points on the Surge card..

They are all the same...

Thanks,

Jim R.

 

[f7McCall]

Thxs Jim, hooked up to Com Port on Surge card working well. Scott