Hi all, I’ve got a 36k gallon swg pool. Tested on Sunday and there was no chlorine after a heavy storm so added liquid chlorine and calcium chloride as my hardness was low too. Tested again today and still FC is zero. Any thoughts? I am wondering if my salt cell may be failing. How to check that ? Added my test results from yesterday below. Thanks!
Cloudy water
- Thread starter ravinath
- Start date
- Jun 22, 2014
- 52,049
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Cell? Maybe. Your salt is on the low end as well. Might bring that up by about 400 ppm to see if that helps. Until then, definitely add liquid clorine right away. I would also recommend doing an Overnight Chlorine Loss Test in case algae is the issue.
Thnx for the input! i will try this and may have to do the SLAM process.