Cloudy but good readings???

[71CHEVY4X4]

Confused. - pool appears cloudy definitely not crystal clear as in the past.... panicked a little and did a full panel results below. The one area I am having a little doubt is the PH. My ph appears to be more of a red than the upper level pink or the lower level yellowish. .??? Does this mean it is way high???


FC - 6.5
CC - 0
TA - 100
Calcium Hardness- 250
PH-?

- - - Updated - - -

 

[mknauss]

Put a piece of white paper behind the block tester. But looks high to me.

If the white paper does not change the result, then you need to lower our pH. Use PoolMath. Enter all your test results into Now, using 8 as pH. Enter 7.4 for target. Add muriatic acid based on that. Circulate pool for 30 minutes, re test pH, repeat as necessary to get pH to 7.4