Circupool RJ-45 classic O-ring size

[jeeman]

Hi, I keep tearing my o-rings when replacing my cell, and need new ones. DSP is charging an arm and a leg for this! Anyone know what size this is, so I can just grab amazon ones for $1 each?

CircuPool RJ-Classic O-Ring Set-CP-ORINGS

www.discountsaltpool.com

Jee

 

[PoolStored]

$9 is not an arm and a leg.

4x62 is the correct size, and Viton is a good O-ring material for chlorine.

The actual size is:
62mm ID
70mm OD
4mm width

They are available on Amazon for 5 for $7.99...not much savings...

Amazon.com

 

[proavia]

You need to determine why the O-rings are tearing. That's not normal.

Are you lubing the O-rings with silicone lube (like Magic Lube II) and not lube with teflon in the mix (Magic Lube I)?

 

[jeeman]

You need to determine why the O-rings are tearing. That's not normal.

Are you lubing the O-rings with silicone lube (like Magic Lube II) and not lube with teflon in the mix (Magic Lube I)?

I figured it out....needed to lube everything more, including the nuts, which were almost impossible to turn. Ended up cracking the housing before figuring this out. So now I have to replace that.

Also, I went to Leslies and compared the sizes....the O-ring size is 2.25" ID, 2.50" OD and 1/8" thick. I'm sure the one PoolStored linked would also work.

 

[jeeman]

$9 is not an arm and a leg.

4x62 is the correct size, and Viton is a good O-ring material for chlorine.

The actual size is:
62mm ID
70mm OD
4mm width

They are available on Amazon for 5 for $7.99...not much savings...

Amazon.com

Are you sure this is the right size for the Classic? I believe you cut and paste from the post below, but I think this is the size for the Plus, which is different.

Circupool RJ 60 Plus O-ring size

Does anyone know the material type and size of the O-rings for a Circupool RJ 60 Plus?

www.troublefreepool.com

 

[PoolStored]

You are correct, I missed you have the classic.

 

[jeeman]

ok, thanks for the clarification!