Circupool Question

[Nibis420]

Just wondering how long a normal rest period is supposed to last. Got mine hooked up lastnight, chlorine was low @ .68ppm (measured with Hach Colorimeter II ) put it on super chlorinate and it was around 8ppm in the morning I put it in normal mode for the rest of the day @ 50% and was at 4.6ppm when I came home. I noticed it wasn't generating when I got home, cell volts around 27, cell amp -0.00 and 0000 salinity, average salinity is 3600. If i turn it off, it will start generating, then the cell amp will be around -3 to 4

Still working on getting my CYA up, haven't measured it yet because I was trying to dissolve it in a bucket, super slow process

 

[pooldv]

All SWGs have a duty cycle of around 1-1/2 to 3 hours or so. So, if set at 50% it will be in for an hour-ish and off for an hour-ish. 75% will be on about 2 hours and off for 1. I dont know what the actual run cycle time is for circupool.

 

[Nibis420]

Thanks, just wanted to make sure it's normal

 

[mknauss]

Circupool SWCG's have a cycle time of 180 minutes.

 

[Nibis420]

Thanks !