Hey everyone! So my pool is finally up and running and we have had it for about 1.5 months now. It is around 18k gallons pool and spa. No salt system.
I am having major issues keeping the chlorine where it needs to be.
Here are my current readings
PH - 8.2 (It's been around 7.8 for a while, but went up a little over the last few days)
Chlorine - 0
Alkalinity - 90
CYA - 30
I used tablets in the start, my builder recommended them through the feeder, however after reading on here about them, I figured I would use just a bit to get the CYA numbers up. I now have been using liquid chlorine and I just cannot seem to keep the number off 0. We did half a gallon 2 days ago and measured yesterday, back at 0. Did another half gallon, measured today, back at 0.
Any recomendations?
Also I have the TF-100 kit.
Thanks,
I am having major issues keeping the chlorine where it needs to be.
Here are my current readings
PH - 8.2 (It's been around 7.8 for a while, but went up a little over the last few days)
Chlorine - 0
Alkalinity - 90
CYA - 30
I used tablets in the start, my builder recommended them through the feeder, however after reading on here about them, I figured I would use just a bit to get the CYA numbers up. I now have been using liquid chlorine and I just cannot seem to keep the number off 0. We did half a gallon 2 days ago and measured yesterday, back at 0. Did another half gallon, measured today, back at 0.
Any recomendations?
Also I have the TF-100 kit.
Thanks,