- Aug 7, 2021
- 21
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Hi! Still getting used to testing on my own. Using a t100 kit. Here are the numbers from just now:
FC 8.5
CC 0
TA 70
CYA 40 (still not sure if I’m reading this one accurately)
Ph 8
Salt 4000
1. Salt is high but the computer shows 3300. Should I calibrate it to match my test numbers?
2. SWG set at 65% but I just bumped it to 75% as I saw a few algae looking spots. Water is crystal clear otherwise.
3. Do I need to add/adjust anything? Getting ready for a big Labor Day picnic
Thanks!!
FC 8.5
CC 0
TA 70
CYA 40 (still not sure if I’m reading this one accurately)
Ph 8
Salt 4000
1. Salt is high but the computer shows 3300. Should I calibrate it to match my test numbers?
2. SWG set at 65% but I just bumped it to 75% as I saw a few algae looking spots. Water is crystal clear otherwise.
3. Do I need to add/adjust anything? Getting ready for a big Labor Day picnic
Thanks!!