I have a pressure issue with my in-floor cleaning system that I can’t seem to solve. I have a Pentair cartridge system and a Caretaker 5 port in-floor cleaning system. When I have the Caretaker system engaged I’m getting 8 PSI at the water valve assembly while I’m getting around 30 PSI at the cartridge filter housing. Due to the low pressure my heads barely pop up which is creating obvious issues. If I bypass the Caretaker housing by switching to the return, the pressure at the filter housing drops to 15. I’ve cleaned the cartridges, replaced both pressure gauges (so I know the pressure readings are accurate) and cleaned/rebuilt the Caretaker water valve housing. The only thing I haven’t done that I can think of is replace the cartridges but given that I cleaned them, I wouldn’t think that’s the issue. I suppose another resolution would be to replace the pressure relief valve in case that’s leaking pressure. Any idea as to what’s going on here? Thank you in advance!