Hi All,
My first post here! I am a new AGP owner (22x52 Intex XTR). I am struggling to keep my chlorine levels up, and my alkalinity is high despite my pH being 7.5. I am not sure if I should just add a lb or two of non-chlorine shock and run the generator on boost, or if I need to SLAM with chlorine? Here are my current levels tested with a 6-way test kit from Leslie's.
TC = 1
FC= 0.5
CC = 0.5
CYA = 45
pH = 7.5
Alk = 210
10,500 gallon pool. Water is clear, just can't hold on to chlorine even with the solar cover on, and it has been 75-80 degrees the last few days. Thoughts?
My first post here! I am a new AGP owner (22x52 Intex XTR). I am struggling to keep my chlorine levels up, and my alkalinity is high despite my pH being 7.5. I am not sure if I should just add a lb or two of non-chlorine shock and run the generator on boost, or if I need to SLAM with chlorine? Here are my current levels tested with a 6-way test kit from Leslie's.
TC = 1
FC= 0.5
CC = 0.5
CYA = 45
pH = 7.5
Alk = 210
10,500 gallon pool. Water is clear, just can't hold on to chlorine even with the solar cover on, and it has been 75-80 degrees the last few days. Thoughts?