Can’t change SWG output??

OlivasFam

Active member
May 7, 2022
29
Liberty, MO
Pool Size
15000
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-40
I keep trying to lower my SWG output but everytime I decrease it, it just jumps back up. It’s at 80%. When I push the down button nothing happens. If I hold the down button it will go to 40% but then after a few seconds goes right back to 80%. My chlorine level is high so I’m just trying to cutback on my output for awhile to lower it.
Anyone know how to make it stay lower or just how to shut it off??
 

Enjoying this content?

Support TFP with a donation.

Give Support

Attachments

  • 2D8038D8-E3B7-40D3-A8E8-4B2A483DC11B.jpeg
    2D8038D8-E3B7-40D3-A8E8-4B2A483DC11B.jpeg
    357.7 KB · Views: 3
  • CB1AB561-0D15-4702-B842-FFFF5E0F7EB4.jpeg
    CB1AB561-0D15-4702-B842-FFFF5E0F7EB4.jpeg
    513.1 KB · Views: 5
  • 49B533E5-BBAA-4D6A-8387-DF28F01720DB.jpeg
    49B533E5-BBAA-4D6A-8387-DF28F01720DB.jpeg
    450.9 KB · Views: 5
  • 9633665C-0A4B-4F5B-9996-49B3ADE55F47.jpeg
    9633665C-0A4B-4F5B-9996-49B3ADE55F47.jpeg
    674.1 KB · Views: 5
  • BBBEF3AD-291F-4247-9C91-1C0298F270B2.jpeg
    BBBEF3AD-291F-4247-9C91-1C0298F270B2.jpeg
    573.3 KB · Views: 5
  • 2E534948-B2A7-467B-A813-2276CB9209B6.jpeg
    2E534948-B2A7-467B-A813-2276CB9209B6.jpeg
    314.3 KB · Views: 5
  • FB29EC4C-F577-4A44-81E1-77AEFFCE8151.jpeg
    FB29EC4C-F577-4A44-81E1-77AEFFCE8151.jpeg
    550 KB · Views: 4
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.