- Jun 22, 2014
- 47,890
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Steve, when you get back and test again, I would recommend trying it this way (small differences):
Grab a water sample with a clean container (i.e. small pool store sample bottle or something new/clean. Rinse it once in the pool water THEN dip it in about shoulder length to get a fresh sample. Use that bottle sample to squirt/pour into your 10 ml sample tube. From there, add ONE heaping scoop of powder. Of course let mix, count drops until clear and divide by 2. I don't recall .... do you have the "Speed Stir"?
Grab a water sample with a clean container (i.e. small pool store sample bottle or something new/clean. Rinse it once in the pool water THEN dip it in about shoulder length to get a fresh sample. Use that bottle sample to squirt/pour into your 10 ml sample tube. From there, add ONE heaping scoop of powder. Of course let mix, count drops until clear and divide by 2. I don't recall .... do you have the "Speed Stir"?