I have the exact same issue as this user with my Hayward Aqua Plus system throwing a Communication Error. Ironically, I live in the same area as the original poster and my pool pump setup is identical (where my 220v pump outlet is controlled by a paddle switch and a double 20A breaker). I will need to bypass the relay on the Hayward Aqua Plus so it doesn’t continue to short cycle my single speed pump. Per the earlier detail in the post, I will connect the one set of wires (terminals 2 & 4) together with a wire nut and the second set of wires (terminals 6 & 8) together with a second wire nut. Do I have that correct?
Bypassing Prologic
- Thread starter mholt85
- Start date
- Jul 21, 2013
- 65,812
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Sounds like you have things correct. But pictures are always good to see that your words describe what you actually have.
Sounds like you have things correct. But pictures are always good to see that your words describe what you actually have.