So My pool is in, and finally the COVER is on *auto cover* so im not blowing FC out the top, not having to drain with heavy rains...
First test
PH - 7.9
TA - 90
FC- .5
CC - 0
CYA - 0 (havent added any)
CH - 100
Sal - 3000
So not bad out of the gate really.
First thing first is to get my PH down a bit and TA as well. Would like to get TA down to 70 or so, and PH obviously around 7.6
Also going to bring up my Hardness from 100 to 200 at least... 100 just seems much too low. Do those with low CH usually raise it? or do those with Harder water only lower it?
Ive read if you are at 100 than let it be. thoughts on that?
Let the SWG run today and overnight with the cover on, it should catch up and be good to go... lets see how this goes
First test
PH - 7.9
TA - 90
FC- .5
CC - 0
CYA - 0 (havent added any)
CH - 100
Sal - 3000
So not bad out of the gate really.
First thing first is to get my PH down a bit and TA as well. Would like to get TA down to 70 or so, and PH obviously around 7.6
Also going to bring up my Hardness from 100 to 200 at least... 100 just seems much too low. Do those with low CH usually raise it? or do those with Harder water only lower it?
Ive read if you are at 100 than let it be. thoughts on that?
Let the SWG run today and overnight with the cover on, it should catch up and be good to go... lets see how this goes
Last edited: