Auto fill levolor valve keeps adding water to the pool

[Vados09]

Recently I noticed that my water level started to increase in vanishing edge ( where my auto fill levolor is as well ), I checked if Levolor was filling water and it wasn't but it the power stays on the whole time. Then I checked the valve and I can hear the water going through. I also noticed top part is cracked ( see pictures ). I don't see similar replacement part online anywhere but I do see look alike ( Plastic Zodiac - 1in. Plastic Valve, 24V Solenoid with Flow Control ).

Does anyone if that plastic Zodiac valve can be used for replacement? or if someone know where to buy exact same part?

 

[Poolbreh]

Any 24vac valve will work. Yours looks like a brass orbit valve.

 

[Vados09]

Any 24vac valve will work. Yours looks like a brass orbit valve.

Thank you so much! I was able to replace it with Orbit brass valve. So far so good.
Also, do you know if Levolor always needs to have green light on ( power light ) ? Mine always stays on and I think before I've seen it completely off..

 

[Poolbreh]

Yes green power light should always be on.

 

[Vados09]

Yes green power light should always be on.

Thanks again!