I just opened for the season. when I turned the panel to Auto the Power and No Flow lights turned on for a second or so along with the display then all turned off - all lights and display are off. Where do I begin troubleshooting this issue?
Aquarite - power/no flow flash on then off
- Thread starter abfab
- Start date
- Jul 21, 2013
- 53,442
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Examine the board for any burnt components or solder points.
www.troublefreepool.com
Hayward Aquarite SWG - Further Reading
www.troublefreepool.com