Hello everyone! I am going to instal an SWG and I have a question. My AqualinkRS board has to RS-485 connectors that are both being used. One is controlling the iAqualink and the other is controlling a two speed pump. I was going to buy a 6584 multiplex board so I can add the connection to the SWG but I read that you can wire 2 devices up to each RS-485 connectors. Is this true? From what I understand I can just add the red, green, yellow, and black wires to my exsisting connectors and the Aqualink will recognize the PLC1400 and it will work. Thanks in advance for the help!