- Mar 1, 2013
- 109
- Pool Size
- 15000
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
Hey folks,
Three year old AquaPure 1400 giving me the dreaded no flow signal. I never took notice before but does the flow light always blink on the tri sensor? I’m guessing it’s blinking because of the no flow. The panel is saying no flow and that means no chlorine production. I added new cartridge filters today so that’s not it. Removed the cell and looked for build up (none) but still gave it a quick bath in a muriatic solution. Lightly sanded the two sensors to make sure they’re working. I don’t have a cal button on my board. I think mine is the newer style with small buttons on the board for salinity, temp H and L. I’m leaning toward buying a new tri sensor but I’m annoyed it’s possibly dead after three years. I powered the panel down completely as well, removed the ribbon cable from the board and reseated it. Then powered it back on. I also checked that program A was activated. For kicks I switched it to program B but that did nothing. Any other suggestions? I don’t think these have screen filters on them but maybe I missed it somewhere. Thank you.
Three year old AquaPure 1400 giving me the dreaded no flow signal. I never took notice before but does the flow light always blink on the tri sensor? I’m guessing it’s blinking because of the no flow. The panel is saying no flow and that means no chlorine production. I added new cartridge filters today so that’s not it. Removed the cell and looked for build up (none) but still gave it a quick bath in a muriatic solution. Lightly sanded the two sensors to make sure they’re working. I don’t have a cal button on my board. I think mine is the newer style with small buttons on the board for salinity, temp H and L. I’m leaning toward buying a new tri sensor but I’m annoyed it’s possibly dead after three years. I powered the panel down completely as well, removed the ribbon cable from the board and reseated it. Then powered it back on. I also checked that program A was activated. For kicks I switched it to program B but that did nothing. Any other suggestions? I don’t think these have screen filters on them but maybe I missed it somewhere. Thank you.
