Can someone help me figure out what relay I need to order to replace the pump filter one that burned out (see pic)? Also I would like to replace the breaker attached to it. The ones I found do not have the metal bar. Is that needed? Or can I order a standard Siemens double pole 20amp breaker? If anyone knows the part numbers or where I can order them that would be fantastic. Any tips on how to replace the relay and breaker is also very much appreciated.
Aqualogic/Goldline Relay and Breaker Replacement
- Thread starter cfvilleg
- Start date
G7L-2A-BUBJ-CB-IN DC24 Omron Electronics Inc-EMC Div | Relays | DigiKey
Order today, ships today. G7L-2A-BUBJ-CB-IN DC24 – General Purpose Relay DPST-NO (2 Form A) 24VDC Coil Chassis Mount from Omron Electronics Inc-EMC Div. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
G7L-2A-BUBJ-CB DC24 Omron Electronics Inc-EMC Div | Relays | DigiKey
Order today, ships today. G7L-2A-BUBJ-CB DC24 – General Purpose Relay DPST-NO (2 Form A) 24VDC Coil Chassis Mount from Omron Electronics Inc-EMC Div. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
Look on the inside of the door for compatible circuit breakers.
You want GFCI.
Siemens 20 Amp Double Pole Type QPF2 GFCI Circuit Breaker US2:QF220AP - The Home Depot
Siemens GFCI circuit breakers are UL Listed and CSA Certified as Class A devices. These circuit breakers offer the new Self-Test and Lockout feature as required by UL 943, enabling the GFCI to automatically
www.homedepot.com
Last edited:
Thanks for the quick reply.
Will order the relay right away.
Please excuse the dumb question but for the breaker, I found this --> https://www.amazon.com/Siemens-Q22020CT2-20-Amp-Circuit-Breaker/dp/B000VYOT9S not GFI but a closer match? I can't tell but aren't 2 of the breakers tied together to make it a quad or can they be separated? if they are separate I will order the one you suggested for sure.
Thank you again for your help.
Will order the relay right away.
Please excuse the dumb question but for the breaker, I found this --> https://www.amazon.com/Siemens-Q22020CT2-20-Amp-Circuit-Breaker/dp/B000VYOT9S not GFI but a closer match? I can't tell but aren't 2 of the breakers tied together to make it a quad or can they be separated? if they are separate I will order the one you suggested for sure.
Thank you again for your help.
It looks like the Aux 1 and the Aux 6 relays are not being used.
You could use one of those extra relays if you need it to work right away.
Breakers should be GFCI.
I would get 2 new GFCI breakers and remove the quad breaker.
You could use one of those extra relays if you need it to work right away.
Breakers should be GFCI.
I would get 2 new GFCI breakers and remove the quad breaker.
Last edited: