Aqua Rite Panel off no lights

gatorrx98

New member
Aug 8, 2021
1
North FL
Last year I replaced our entire AquaRite SWG system after 16 years on our initial system and resoldering the current limit or several times. Now my new system is completely dead. I have 240 volts and a good fuse, so I’ve ruled out power issues. Is the board fried? We do have frequent lightning storms here, so that is entirely possible.
 
Welcome to TFP :)

I wish I could help with the SWG but I do not have that one.. I can however help with things getting fried :)

I have all of them and have not had anything fry in house in years..

I would recommend these to start.. at least the whole house or the pool one...

On each plug in the house

On the Air conditioner

On your pump panel

On your main house panel
 
Last year I replaced our entire AquaRite SWG system after 16 years on our initial system and resoldering the current limit or several times. Now my new system is completely dead. I have 240 volts and a good fuse, so I’ve ruled out power issues. Is the board fried? We do have frequent lightning storms here, so that is entirely possible.
I take this as Display and LED's not working. Maybe the U13 chip went bad. The below YouTube videos might offer some help.

 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.