I was getting lo temp/ lol salt error, so I purchased a new cell (temp and salt confirmed fine) because I figured the cell was bad. I'm still receiving the error, so Im wondering if anyone else has had the same issue? I'd like to try anything else I can before I invest in another system. Thanks in advance!
Anyone with a Jandy Truclear?
- Thread starter smohun
- Start date
- Jul 21, 2013
- 65,702
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Pool store and then aquacheck strips. The salt is actually higher than it should be...almost 4000.
- Jul 21, 2013
- 65,702
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Did you get a new cable between the cell and control box with the new cell?
There is nothing repairable in the TruClear.
IMHO, the TruClear is low quality. If you are tied to Jandy replace it with an AquaPure 1400 system which is higher quality and cost.
There is nothing repairable in the TruClear.
IMHO, the TruClear is low quality. If you are tied to Jandy replace it with an AquaPure 1400 system which is higher quality and cost.
It did come with a new cord. Yeah I've heard they aren't repairable and low quality. My pool guy wants to replace it with a Pentair. I'll look into the AquaPure. Thanks for the response.
- Jul 21, 2013
- 65,702
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Pentair IntelliChlor is good. Not the iChlor.
I have been happy with my IntelliChlor for 10+ years.
I have been happy with my IntelliChlor for 10+ years.