Pool is 4 months old, along with the IC40. Everything working great until today, where the IC40 will not show any output lights. Flow and Cell are both GREEN solid. On reset, I get the expected red/green flash and then those 2 lights go green with no lights on the output scale. When trying to determine life left by holding down MORE, bunch of lights flash but still nothing on the output scale. Intellicenter is set to 75% chlorine output and is giving me no errors.
Another ic40 SWG help thread
- Thread starter kaybee77
- Start date
77,
Do you also have an IntelliChem or ipH acid pump???
Are you by chance in the Spa mode??? Make sure you are in Auto and Pool..
Thanks,
Jim R.
Do you also have an IntelliChem or ipH acid pump???
Are you by chance in the Spa mode??? Make sure you are in Auto and Pool..
Thanks,
Jim R.
Nope, no Intellichem or other chemical device here. Also do not have a hot tub/spa and don't see a feature or circuit for such in my intellicenter.
Per the manual, if no lights on output it's off. But it's not.
Per the manual, if no lights on output it's off. But it's not.
77,
Well, not off, but if you have no sanitizer lights it should not be making chlorine. If it is making chlorine, then something is wrong.
Anyway.. It is new.. just file a warranty claim.
Thanks,
Jim R.
