So I have a few pool contractors coming over to give me some quotes this week and I was wondering what some of you might consider I think about as this is my first pool remodel.
The pool was painted before I bought the house...bummer for me. Pulled the wool over my eyes. Major problems with algae getting into the areas where the paint was chipping.
I've replaced the old Crystal clear 2 and old hayward pump for a Pentair DE 60sf and Variable speed pump. I have no idea what this is going to cost me so maybe those of you in So. Cal. can give me some input.
-White Plaster
-Relocate Light J-box (I might do this)
-Possibly clean and repair tile (couple cracked)
-Keep Coping (maybe stain it)
-Baja shelf in the shallow end for the munchkins
-Replace old skimmer and old copper piping, with 2" PVC
-Pool currently has one skimmer and one return. (Replace return with bigger or add new)
-Possibly repair main drain (Believe it's tied into the skimmer somehow, but found plugged
when I removed drain cover.)
-The big feature I would like is to reduce the depth of the deep end since we no longer have a diving board and none of us can even swim that deep without major pain in the ears. (Possbly have it shallow at both ends with it a little deeper in the middle.)
-Pool deck is really bad, but i'll likely have to leave it due to cost and just replace the decking where the diving board and plumbing are.
I will also pull new GFCI circuits for the pump and the light. They were both sharing the same circuit with no GFCI. Scary.
Any advice or input is appreciated!
The pool was painted before I bought the house...bummer for me. Pulled the wool over my eyes. Major problems with algae getting into the areas where the paint was chipping.
I've replaced the old Crystal clear 2 and old hayward pump for a Pentair DE 60sf and Variable speed pump. I have no idea what this is going to cost me so maybe those of you in So. Cal. can give me some input.
-White Plaster
-Relocate Light J-box (I might do this)
-Possibly clean and repair tile (couple cracked)
-Keep Coping (maybe stain it)
-Baja shelf in the shallow end for the munchkins
-Replace old skimmer and old copper piping, with 2" PVC
-Pool currently has one skimmer and one return. (Replace return with bigger or add new)
-Possibly repair main drain (Believe it's tied into the skimmer somehow, but found plugged
when I removed drain cover.)
-The big feature I would like is to reduce the depth of the deep end since we no longer have a diving board and none of us can even swim that deep without major pain in the ears. (Possbly have it shallow at both ends with it a little deeper in the middle.)
-Pool deck is really bad, but i'll likely have to leave it due to cost and just replace the decking where the diving board and plumbing are.
I will also pull new GFCI circuits for the pump and the light. They were both sharing the same circuit with no GFCI. Scary.
Any advice or input is appreciated!








