Adding stabilizer

SerenityIV

Well-known member
Aug 2, 2019
45
Orlando, FL
Just added some Clorox stabilizer via a sock in the skimmer. By squeezing the sock frequently, it seemed to dissolve out of the sock pretty quickly within an hour or two. Do I still need to run the pump all night or is the stabilizer through the system enough to be safe for it to run on its cycle? Pump shuts off in a couple hours
 

PoolGate

Gold Supporter
TFP Guide
Jun 7, 2017
5,541
Damascus, MD
Pool Size
29000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Jandy Aquapure 1400
I'd run it just to ensure complete mixing but there is no harm not.
 
  • Like
Reactions: wolverine

SerenityIV

Well-known member
Aug 2, 2019
45
Orlando, FL
Yeah, I figured it wouldn't cause harm to anything. Will probably turn off when I go to bed and let it resume tomorrow. From other postings, it seems that it's fine if it's already out of the sock and diluted. I was surprised how easy it was to dilute with just squeezing the sock etc
Just wanted to make sure it wasn't too much at once, but I doubt it considering people put in liquid stabilizer that goes in all together at once.
 
  • Like
Reactions: tim5055 and mknauss