Hi All!
I have inherited a Pentair Wisperflo WFE-2, 1/2 HP pump (Link) for the fountain (the fountain is about 660-700 Gal). There's no filter, just a pump, so keeping the water clear is a bit of a pain... I was thinking of plumbing in a sand filter after the pump, but I don't want to add a huge one, given the size of the fountain. Considering something like a 14" (which is already an overkill, but can't find anything smaller...) sand by Raypak (Link), but it has 29 PSI max working pressure, and according to Pentair support, the pump's working pressure is 40 PSI (well, they weren't too specific... they said "40-60 PSI", but after repeated inquiries, said that the "normal working pressure is 40 PSI").
Please advise.
Thank you!
I have inherited a Pentair Wisperflo WFE-2, 1/2 HP pump (Link) for the fountain (the fountain is about 660-700 Gal). There's no filter, just a pump, so keeping the water clear is a bit of a pain... I was thinking of plumbing in a sand filter after the pump, but I don't want to add a huge one, given the size of the fountain. Considering something like a 14" (which is already an overkill, but can't find anything smaller...) sand by Raypak (Link), but it has 29 PSI max working pressure, and according to Pentair support, the pump's working pressure is 40 PSI (well, they weren't too specific... they said "40-60 PSI", but after repeated inquiries, said that the "normal working pressure is 40 PSI").
Please advise.
Thank you!
