Does anyone know where I can find the 3 wire plug that goes to the automation system coming from the actuator? The electrician cut the actuator lines and did not remove the plug when hooking up the new omnilogic. I am doing all of the low votalge and found that there is no way to plug the actuators in...... Any suggestions?
Actuator plug in for goldline GVA-24
- Thread starter toodocs
- Start date
Try Inyopools.com They're pretty good at finding those odd parts
Or a total replacement?- https://www.amazon.com/Hayward-GVA-24-Valve-Actuator-Replacement/dp/B002JJZ0NM
Maddie
Or a total replacement?- https://www.amazon.com/Hayward-GVA-24-Valve-Actuator-Replacement/dp/B002JJZ0NM
Maddie
Jandy Jva Power Cord, 20 Ft, New Style (R0411800) - INYOPools.com
This cable will work.
All you really need is the end plug and the cable. The cable is easy to find. There is a close up picture of the plug end at the link above. Maybe send to digikey.com for a match (Probably 25 cents). If you have enough cable left, you just need the plug.
This cable will work.
All you really need is the end plug and the cable. The cable is easy to find. There is a close up picture of the plug end at the link above. Maybe send to digikey.com for a match (Probably 25 cents). If you have enough cable left, you just need the plug.
Thanks for the quick responses! I ordered just the plug from INYOPools.com. Hopefully this will work!