I have Pentair acid pump connected to Intellichem. I have checked the electrical connections and the setup in program. All is correct. When it shows to be dosing the pump is not coming on and dosing which does not keep my PH within limits. I disconnected the discharge tubing where it connects to pool return line and nothing comes out when dosing. There is check valve to keep pool water from blasting out with this disconnected.
Tank is full of acid and level has not come done any since I filled it.
The connector you plug the power cord to pump is in all the way. You cannot get multimeter leads into the connector on the board with cord connection removed to check for power when dosing. Super small.
I do not know what voltage and type (AC or DC) is going to the pump.
I wanted to see if anyone else had had this issue and/or any ideas on what I can do to get that pump to come when dosing.
Tank is full of acid and level has not come done any since I filled it.
The connector you plug the power cord to pump is in all the way. You cannot get multimeter leads into the connector on the board with cord connection removed to check for power when dosing. Super small.
I do not know what voltage and type (AC or DC) is going to the pump.
I wanted to see if anyone else had had this issue and/or any ideas on what I can do to get that pump to come when dosing.