Sooooo been battling my pool since the weekend before memorial day. Sand filter failed, thus spewing around 150 lbs of sand into my pool. That being said, I've been trying to vacuum to waste all the sand out of the bottom. The pool water was clear until I stirred everything up again on Friday and noticed the PH was really high so I added MA. Now my pool is insanely cloudy and will NOT clear up no matter what I do. Here are my 2 most recent readings (I forgot to write the others down)
6/7
FC: 7
CC: 0
TA: 340
CYA: 20
PH: 7.8+
Today:
FC: 4
CC: 1 <- Boo.
TC: 5
TA: 280 - Down some after a drain and a couple rains
CYA: 20
PH: 8.2+
Someone tell me what to do. I've used almost an entire gallon of MA to bring the PH down and it isn't happening. Noticed my CYA was in a big chunk in the sock so I beat it up and spread it throughout the pool via the jets spreading it.
6/7
FC: 7
CC: 0
TA: 340
CYA: 20
PH: 7.8+
Today:
FC: 4
CC: 1 <- Boo.
TC: 5
TA: 280 - Down some after a drain and a couple rains
CYA: 20
PH: 8.2+
Someone tell me what to do. I've used almost an entire gallon of MA to bring the PH down and it isn't happening. Noticed my CYA was in a big chunk in the sock so I beat it up and spread it throughout the pool via the jets spreading it.