I'm looking for a bit of guidance on the best approach to replacing my current valves with Jandy Neverlube valves. I currently have 4 valves at my equipment pad:
1) Skimmer shutoff valve (before pump)
2) Vacuum shutoff valve (before pump)
3) Drain shutoff valve (before pump)
4) Shallow/Deep end return jets (after pump)
All of these can be seen in the pics I've attached. The questions I have are:
1) Should I replace the 4 current valves with 4 Neverlube valves or would I be better of combining some of these? Should I be looking at 2 or 3 way valves?
2) Should I be looking at making any other changes now given what is seen in my pics?
Thanks in advance
1) Skimmer shutoff valve (before pump)
2) Vacuum shutoff valve (before pump)
3) Drain shutoff valve (before pump)
4) Shallow/Deep end return jets (after pump)
All of these can be seen in the pics I've attached. The questions I have are:
1) Should I replace the 4 current valves with 4 Neverlube valves or would I be better of combining some of these? Should I be looking at 2 or 3 way valves?
2) Should I be looking at making any other changes now given what is seen in my pics?
Thanks in advance