No power/generating light on Hayward Aqua Rite SWG

[Victor]

Hello all, was doing my checks this morning on my pool and I noticed my power light and generating light are not "on" on my swg. I checked the manual and it said try replacing fuse, which I did and no luck.
Readings are
87
8.7
0.00
51p
-0
AL-0
R 1.58
T-15
I added some bleach since my FC was at 2, any ideas??
Thanks in advance
Victor


Sent from my iPhone using Tapatalk

 

[ping]

It could be the current limiter has gone bad. It is a $3 part and can be replaced very easily by anyone who has any type of soldering skills. Do a search for "current limiter" and many articles will pop up.

 

[Scuba_Steve]

Also, is the SWG plugged into a different outlet than your filter? Your GFCI could have tripped.

 

[Victor]

this seems to be the problem like what was said, it seems to be cracked and when I touch it both lights come back on.....


Sent from my iPhone using Tapatalk

 

[Hayward Pool]

Good day, not sure on the age of the unit. You might try calling our tech line about the unit. Could have anywhere from a 1 or 3 year warranty depending on installation. 908-355-7995

 

[Philntx]

Mouser has these for about $18.00 with shipping. http://www.mouser.com/Search/ProductDetail.aspx?R=AS32_2R025virtualkey58240000virtualkey995-AS32-2R025

 

[Victor]

Thanks, I actually called Hayward and board was still covered!! So it's replaced and running!!!


Sent from my iPhone using Tapatalk