Hello all, I'm sorry if this is in the wrong section. I put up my pool last year, according to, at the time the towns requirements, it included bonding using 8 gauge bare copper around the pool, and I mounted it in 6 spots. Long story I passed final inspection last year, or so I thought. Got a notice last week saying my permit was still open and they required an inspection. Inspector came out today and said I need to bond the water and that I needed a bonding grid.
So for bonding the water, I'll probably just go with the Bond safe 680 skimmer plate, but where do I get a copper grid? Do I make my own? Can anyone suggest how far out from the pool it needs to go and how deep it should be on the ground? I did see a lot in the searches but a lot seemed to be for just doing a single 8 gauge wire, like I originally had done.
Thank you all
So for bonding the water, I'll probably just go with the Bond safe 680 skimmer plate, but where do I get a copper grid? Do I make my own? Can anyone suggest how far out from the pool it needs to go and how deep it should be on the ground? I did see a lot in the searches but a lot seemed to be for just doing a single 8 gauge wire, like I originally had done.
Thank you all