I just got my vinyl liner replaced and filled up the pool - everything looked good - went ahead and paid the contractor. After he left I noticed a wrinkle (I’m guessing about 1.5 ft in length) on the bottom of the pool when night fell and I turned on the pool light. I would not have noticed it unless the pool light was on. Contractor says I’m just looking for imperfections and doesn’t want to come back out. In fact he basically tried to bully me into thinking I’m being unreasonable. The old liner had NO wrinkles, so that is what my expectation was for the new liner. There were a few wrinkles in the liner when the pool was filling, and the contractor had fixed them with a toilet plunger. He says to wait a few weeks for it to even out on its own. He called it a “pocket wrinkle” that’s like a shirt that smooths out as you wear it. However I’m concerned dirt will build up in it or something will snag it. I would like to inspect closer but I filled with well water (about 59 degrees!). What is the best course of action here? Should I wait on this or should it be fixed ASAP?
2005 build, 16K gal, IG - vinyl, 3/4 hp WhisperFlo pump, sand filter, Polaris cleaning robot
2005 build, 16K gal, IG - vinyl, 3/4 hp WhisperFlo pump, sand filter, Polaris cleaning robot