PH-7.2
FC-4
CC-0
TA-60
CH-175
CYA-55-60
Salt-3400 as per test set and 2450 on easytouch controller (that's a whole other thread)
Pool store says I need to:
Add 18lbs of TA increaser
Wait 6 hrs
Add 18lbs of TA increaser
Wait 6 hrs
Add 9 lbs of TA increaser
Wait 6 hrs
Add 5 lbs of clean shock brush pool after adding
Wait 24 hrs
Add 16 lbs of calcium hardness increaser
Wait 6 hours
Add 16 lbs of calcium hardness increaser
Wait 6 hours
Add 16 lbs of calcium hardness increaser
Wait 6 hours
If I understand correctly from this site my numbers are in line other than pH which I want at 7.5. Being a vinyl lined pool I thought I read where calcium hardness is not a big deal.
Please shed some light on this for me. I have used these same numbers for the last two years and everything seemed to work fine. I just don't want to damage liner or equipment meant by not doing something.
Thanks
FC-4
CC-0
TA-60
CH-175
CYA-55-60
Salt-3400 as per test set and 2450 on easytouch controller (that's a whole other thread)
Pool store says I need to:
Add 18lbs of TA increaser
Wait 6 hrs
Add 18lbs of TA increaser
Wait 6 hrs
Add 9 lbs of TA increaser
Wait 6 hrs
Add 5 lbs of clean shock brush pool after adding
Wait 24 hrs
Add 16 lbs of calcium hardness increaser
Wait 6 hours
Add 16 lbs of calcium hardness increaser
Wait 6 hours
Add 16 lbs of calcium hardness increaser
Wait 6 hours
If I understand correctly from this site my numbers are in line other than pH which I want at 7.5. Being a vinyl lined pool I thought I read where calcium hardness is not a big deal.
Please shed some light on this for me. I have used these same numbers for the last two years and everything seemed to work fine. I just don't want to damage liner or equipment meant by not doing something.
Thanks