Update on subject: Cloudy Blue Pool
Hi, After opening my pool 2 weeks ago and lots of advise from you guys, my pool is now blue and visible in some areas. I received my TFP 100 Test Kit today, Here's my reading:
FC - 9.0
cc - 1.5
tc - 10.5
ta - 80
ch - 100
ph between 7.0-7.2 not sure
cya - could not get the black dot to disappear
Since I'm aiming for 15ppm FC overnight, I added 4 gallons of ultra chlorine 6% tonight.
After vacuuming to waste today and then putting the filter to backwash, when I return it to run on filter(since I'm doing 24/7)now I notice I have very little pressure coming out of my return line. When I listen to the water coming in at the return line I hear a gulp sound. The pressure is at 0 on the timer. Did I blow something out by getting all that junk out today. How do I get my filter to give good suction.
p.s. I only have 1 return line
Hi, After opening my pool 2 weeks ago and lots of advise from you guys, my pool is now blue and visible in some areas. I received my TFP 100 Test Kit today, Here's my reading:
FC - 9.0
cc - 1.5
tc - 10.5
ta - 80
ch - 100
ph between 7.0-7.2 not sure
cya - could not get the black dot to disappear
Since I'm aiming for 15ppm FC overnight, I added 4 gallons of ultra chlorine 6% tonight.
After vacuuming to waste today and then putting the filter to backwash, when I return it to run on filter(since I'm doing 24/7)now I notice I have very little pressure coming out of my return line. When I listen to the water coming in at the return line I hear a gulp sound. The pressure is at 0 on the timer. Did I blow something out by getting all that junk out today. How do I get my filter to give good suction.
p.s. I only have 1 return line