Finally got the liner dropped in today and filled with fresh water, that I was told comes from a spring. I need some help to get the chemicals in balance now. I've ran the numbers through poolmath but I'd like some advice before I go putting stuff in the pool.
Test kit... TFT 100.
Temp 60F
PH 7.5
CL 0
CC .5
TC .5
CH 400 (Checked it twice to make sure, also it's a vinyl pool)
TA 320 (Checked twice)
CYA 0
Poolmath tells me to add
1.1 gal 8% bleach to hit 4 FC
DO nothing for PH
TA reduce PH to 7.0 - 7.2 with acid and then aerate to increase PH
CH replace 44% of the water... Fresh fill today! Don't really want to do that!
CYA 0 to 40 with 7lbs of stabilizer... I have 6lbs on hand.
All help/advice is very much appreciated. Thanks Schroedz
Test kit... TFT 100.
Temp 60F
PH 7.5
CL 0
CC .5
TC .5
CH 400 (Checked it twice to make sure, also it's a vinyl pool)
TA 320 (Checked twice)
CYA 0
Poolmath tells me to add
1.1 gal 8% bleach to hit 4 FC
DO nothing for PH
TA reduce PH to 7.0 - 7.2 with acid and then aerate to increase PH
CH replace 44% of the water... Fresh fill today! Don't really want to do that!
CYA 0 to 40 with 7lbs of stabilizer... I have 6lbs on hand.
All help/advice is very much appreciated. Thanks Schroedz
Last edited: