I'm new here but have already read through alot of stuff and threads on here but I can't seem to nail down an answer to my question so I'll try a new thread if you guys don't mind.
Here is what I have I'm in Middleburg Florida, I have an Intex 18x48 Blue side. I recently plumbed it with 1 1/2 inch pvc and a Hayward ST180 Sand Filter and Super Flo LX 1HP pump.
My problem is, I am getting serious water coming from the strainer lid when closed, O-ring is good, I even tried a different lid.
The pump sits about a foot or so below the suction side drain of the pool.
Any thoughts suggestions. I'm sure it is simple(at least I hope so) and I'm just overlooking it.
Here is what I have I'm in Middleburg Florida, I have an Intex 18x48 Blue side. I recently plumbed it with 1 1/2 inch pvc and a Hayward ST180 Sand Filter and Super Flo LX 1HP pump.
My problem is, I am getting serious water coming from the strainer lid when closed, O-ring is good, I even tried a different lid.
The pump sits about a foot or so below the suction side drain of the pool.
Any thoughts suggestions. I'm sure it is simple(at least I hope so) and I'm just overlooking it.