I have just completed an 20,000 gal in-ground pool at my home and I am hooking up the equipment. The equipment came as a kit. I have an Intelliflo pump and a Hayward OnCommand controller. I have scoured the internet to see if someone has successfully hooked these two items together. I would like to be able to take full advantage of the Intelliflo capabilities and it seems that I may lose some functionality running it through the OnCommand. It appears that I may need to buy an Intellicomm II interface to go between the two though the Intellicomm II instructions only cover the Hayward Pro Logic Control System. Currently I have the pump connected directly to the breaker as the pool should finish filling today and I will be running the pump directly until I figure it out.
Adding to the fun is a Nexa Pure chlorine generator with pH Clear. The Nexa Pure would like to be hooked up to the pump and the timer for full functionality. Any thoughts on how to add that to the mix?
Thanks for any inputs.
Adding to the fun is a Nexa Pure chlorine generator with pH Clear. The Nexa Pure would like to be hooked up to the pump and the timer for full functionality. Any thoughts on how to add that to the mix?
Thanks for any inputs.