Pool has been up and running 1 week. SWCG set at 50%. Added since opening 1 gallon of MA, (ph was 8.2) 8# of CYA, 3# of calcium hypochlorite shock & about 50 oz. of bleach over the course of one week.
Numbers as of today using Waterlink Datamate?? and cross checked with Taylor kit:
FC 3.3
TC. 4.21
CC 0.91
PH 7.8
Hardness 44
ALK 130
CYA 38
Salt 3000 (SWG says 3100-3200)
I will take a sample to another store tomorrow for another opinion and order a test kit as well. Water is clear. I can see drains in 6 feet, but I feel like it could be a bit better.
We have had tons of rain the past week, in fact I have only been on the pool once. I had to pump to waste about an inch today.
Any advice would be greatly appreciated. Pool store said all was well and just let the SWG do it's thing.
Numbers as of today using Waterlink Datamate?? and cross checked with Taylor kit:
FC 3.3
TC. 4.21
CC 0.91
PH 7.8
Hardness 44
ALK 130
CYA 38
Salt 3000 (SWG says 3100-3200)
I will take a sample to another store tomorrow for another opinion and order a test kit as well. Water is clear. I can see drains in 6 feet, but I feel like it could be a bit better.
We have had tons of rain the past week, in fact I have only been on the pool once. I had to pump to waste about an inch today.
Any advice would be greatly appreciated. Pool store said all was well and just let the SWG do it's thing.