I opened pool a week ago and see a huge difference in opening earlier than I have in the past. I don't want to mess up a good start, so I'm looking for advice on CYA level. It measured 50 yesterday, and I'm aiming for 70 in gradual additions so I don't overshoot. Pool Calc said 1 gallon of liquid stabilizer to raise to 60; I added that yesterday. This morning CYA is about 52 -- hmmm. I'm wondering whether to stay on plan and keep adding until I get to 70, or should I be making adjustments for the cold water?
I'm using bleach until I pull my salt level up. I'm getting salt today, and want to get it added today if possible because we have a rainy couple of days coming up and I want to get SWG going. So I guess part 2 of the question is should I start the SWG once the salt is up, or should I wait until CYA is at least 60?
Levels:
Water Temp 55, about 1/3 into deep end
FC 5.5
CC 0
PH 7.5
TA 70
CH 190
CYA 52
P.S. Site upgrades are great!
I'm using bleach until I pull my salt level up. I'm getting salt today, and want to get it added today if possible because we have a rainy couple of days coming up and I want to get SWG going. So I guess part 2 of the question is should I start the SWG once the salt is up, or should I wait until CYA is at least 60?
Levels:
Water Temp 55, about 1/3 into deep end
FC 5.5
CC 0
PH 7.5
TA 70
CH 190
CYA 52
P.S. Site upgrades are great!