So started getting ready for the season,
I had a massive algea bloom almost no CYA so started by cleaning it out and shocking Pool info
25k vinyl inground pool sand filter
Just installed a Circupool SI-30
After three days Cl is holding steady.
FC is at 5
no combined chlorine
Calcium hardness is 130
TA 130
PH is 8.0+
Acid demand test was 9 drops so according to taylors chart I need to add about 1.5Gallons Acid. I added a gallon for now
Going to get some CYA today at HD to add to pool.
With regard to the salt system since I am a newb.
When turned off the system reports 3200ppm salt when it runs for an hour is says low salt yet the manual says keep the Nacl between 32-3400ppm. thoughts?
I had a massive algea bloom almost no CYA so started by cleaning it out and shocking Pool info
25k vinyl inground pool sand filter
Just installed a Circupool SI-30
After three days Cl is holding steady.
FC is at 5
no combined chlorine
Calcium hardness is 130
TA 130
PH is 8.0+
Acid demand test was 9 drops so according to taylors chart I need to add about 1.5Gallons Acid. I added a gallon for now
Going to get some CYA today at HD to add to pool.
With regard to the salt system since I am a newb.
When turned off the system reports 3200ppm salt when it runs for an hour is says low salt yet the manual says keep the Nacl between 32-3400ppm. thoughts?