- Aug 16, 2007
- 300
Kit came today. I probably should have waited until this evening but with these numbers, the results would likely be negligible. Probably explains our skin trouble, eh? Water is clear, tastes a little salty, and I have a good deal of calcium buildup on the tile already.
Water temp: 88F
SW exposure, sun most of the day
FC= 15.5
CC= 0
TC= 5
pH= 8.2 (likely higher)
T/A= 570
CH= 490
CYA= 60
Salt level= 2650 ppm, set @ 60% PB originally set it at 80%, service tech lowered it last Fri.
I know I'll need to get the CYA up, and I have not been running the waterfall or spa spillover. Should I do this to bring the TA down?
Only other thing is I'm not solid on the gal amt. of the pool. I came up w/ 17K, but builder says 15.
Water temp: 88F
SW exposure, sun most of the day
FC= 15.5
CC= 0
TC= 5
pH= 8.2 (likely higher)
T/A= 570
CH= 490
CYA= 60
Salt level= 2650 ppm, set @ 60% PB originally set it at 80%, service tech lowered it last Fri.
I know I'll need to get the CYA up, and I have not been running the waterfall or spa spillover. Should I do this to bring the TA down?
Only other thing is I'm not solid on the gal amt. of the pool. I came up w/ 17K, but builder says 15.