So...N Ga is raining , raining raining. I have been out of town and my DH has thankfully kept the water level below the top by running the pump to waste until the water is half way on the skimmer. Here ois muy problem. I have a salt water generator (that was keeping everything beautiful) but now my salt is way low (from dilution). My PH is a little low. Chlorine is non existant. TA is low. What do I do first? I do have some algae beginning on the bottom and I know I need to shock and I know how to use your method. I just need to know if I add salt first? Turn off the SWG? Add Borax? Here are my #'s
FC .5
CC 0
TC .5
PH 7.5
TA 4
CYA 20
Salt 2500 (Jandy requires 4000)
I am going to sweep the bottom before shocking starts. I have to get in to do it because I am short and have a difficult time reaching over where I don't have a deck. I just need to know if I add everything all at once or shock first? Turn up SWG or turn off SWG? Thanks so much, you guys on here are always awesome!! :-D
FC .5
CC 0
TC .5
PH 7.5
TA 4
CYA 20
Salt 2500 (Jandy requires 4000)
I am going to sweep the bottom before shocking starts. I have to get in to do it because I am short and have a difficult time reaching over where I don't have a deck. I just need to know if I add everything all at once or shock first? Turn up SWG or turn off SWG? Thanks so much, you guys on here are always awesome!! :-D