- Jul 23, 2013
- 2
Okay, this should be called a DIYWH - That's DoItYourself With Help.
Pictures are posted at https://www.dropbox.com/sh/zuqcwh7ieyilc1q/_DeA2ZKpXZ
I had a leaky pipe, and while [attempting to] fix the leak, I thought it might be a good idea to move the control box to the other side of the equipment. We didn’t really have much room to walk between the fence and the control panel, so putting it next to the house seemed a good idea.
The control box has the timer, as well as a double circuit breaker and a gfci, and some type of standard plug-in outlet facing down at the bottom right of the box.
Now, I disassembled it completely, gutted the box, and moved the wires under the cement and over to the house.
The conduit on the left I think comes from the main, it is two blacks, a white, and a green, thicker stranded. And the conduit on the right I think is the pool lights – it is solid but thinner, and is green, blue, and white.
Now, I’m trying to figure out if I want to use the same old heavy rusty intermatic box, mount it on the stucco side of the house, and try to put everything back together, or if there might be another way that is better or easier.
I have lots of tools and equipment, multimeter, etc, and some willingness, but I don’t have the background experience.
Is this something that I can be walked through It doesn’t seem like it would be that hard. Put up Box A, put in gfci outlet (or gfci box or ?) and put main into Box A to power the box, then attach pump to cuircuit breaker, then gfci, then lights into gfci? I know there would be a map of types, but I don’t find one.
It’s a basic setup. Pump, Gas heater, lights.
Can this be a DIY project?
Thanks,
Doug
Pictures are posted at https://www.dropbox.com/sh/zuqcwh7ieyilc1q/_DeA2ZKpXZ
I had a leaky pipe, and while [attempting to] fix the leak, I thought it might be a good idea to move the control box to the other side of the equipment. We didn’t really have much room to walk between the fence and the control panel, so putting it next to the house seemed a good idea.
The control box has the timer, as well as a double circuit breaker and a gfci, and some type of standard plug-in outlet facing down at the bottom right of the box.
Now, I disassembled it completely, gutted the box, and moved the wires under the cement and over to the house.
The conduit on the left I think comes from the main, it is two blacks, a white, and a green, thicker stranded. And the conduit on the right I think is the pool lights – it is solid but thinner, and is green, blue, and white.
Now, I’m trying to figure out if I want to use the same old heavy rusty intermatic box, mount it on the stucco side of the house, and try to put everything back together, or if there might be another way that is better or easier.
I have lots of tools and equipment, multimeter, etc, and some willingness, but I don’t have the background experience.
Is this something that I can be walked through It doesn’t seem like it would be that hard. Put up Box A, put in gfci outlet (or gfci box or ?) and put main into Box A to power the box, then attach pump to cuircuit breaker, then gfci, then lights into gfci? I know there would be a map of types, but I don’t find one.
It’s a basic setup. Pump, Gas heater, lights.
Can this be a DIY project?
Thanks,
Doug