- Jun 1, 2013
- 12
So I got my kit today and tested the pool. I started a new thread since my last post just got too scattered. Here are the results
FC - 2
CC - .5
TC - 2.5
TA - 90
CH- 300 (I did this test 3 times with different readings ranging from 400 the first time, 300 the second and 250 the third) So i'm going to go with around 300)
CYA - <20 black dot was still visible just not clearly
Cl - 1
Ph - 8.2
Br - 2
I just got done draining about 1/2 to 2/3rds of the pool and refilling and i've got a light green tint that wont allow me to see the bottom. I cleaned the cartridge filters while the pool was refilling and now it's full so I need to know what my first steps should be. I have some CYA, pH Down, and 3" tri-chlor tablets for the automatic feed but from what i've read the tabs will raise the CYA? I'm very interested in the BBB method and have started learning about it, but for now I need to focus on just getting some clear water. So can someone tell me what the best method to start would be?
FC - 2
CC - .5
TC - 2.5
TA - 90
CH- 300 (I did this test 3 times with different readings ranging from 400 the first time, 300 the second and 250 the third) So i'm going to go with around 300)
CYA - <20 black dot was still visible just not clearly
Cl - 1
Ph - 8.2
Br - 2
I just got done draining about 1/2 to 2/3rds of the pool and refilling and i've got a light green tint that wont allow me to see the bottom. I cleaned the cartridge filters while the pool was refilling and now it's full so I need to know what my first steps should be. I have some CYA, pH Down, and 3" tri-chlor tablets for the automatic feed but from what i've read the tabs will raise the CYA? I'm very interested in the BBB method and have started learning about it, but for now I need to focus on just getting some clear water. So can someone tell me what the best method to start would be?