So I have a dead cleaner out of warranty, so I decided to tear it open, only to find the desiccant bag made of paper with glued edges that didn't hold together. the stuff was all over the circuit board, in the top motor housing and all aroung the drive motor shaft. All around the oring that surrounds the lid, the stuff was dang near coming out, and the screws were not even that snug.
so the wet/moist desiccant now gets onto the circuit board and shorts something out, or in parts of the motor. For the cost of them, can't they even use a cloth bag sewn shut.
Anyone successfully resealed the motor box on one of these?
Doesn't seam to have any type of sealant, other than just a glob of lube around the o-ring.
Thanks
wendy
so the wet/moist desiccant now gets onto the circuit board and shorts something out, or in parts of the motor. For the cost of them, can't they even use a cloth bag sewn shut.
Anyone successfully resealed the motor box on one of these?
Doesn't seam to have any type of sealant, other than just a glob of lube around the o-ring.
Thanks
wendy