Hello to all,
Just opened up our pool for the season last week,and amongst not having any stabilizer,there was no FC reading for the water.I installed a SWG in the middle of last season and all was well.Water stayed in balance for the season.After opening this season,adjusted the PH to 7.6.Added approximately 6 lbs of stabilizer to the water,the CYA is reading 40PPM.I also found the info on your website that tells me not to count on the SWG to raise the chlorine level to shock values on it's own,it needs help.So i used the levels the pool calculated suggested and dumped 9 gallons of 6% bleach in the depend for 27000 gallons of water.Two hours later,FC is still at .5. I checked this with a Taylor K2005 test kit with all new reagents.
Total chlorine was pegged high,well above what the tester will register.I do not understand what I am doing wrong here.
Any help would be appreciated.
SLUGGO
Just opened up our pool for the season last week,and amongst not having any stabilizer,there was no FC reading for the water.I installed a SWG in the middle of last season and all was well.Water stayed in balance for the season.After opening this season,adjusted the PH to 7.6.Added approximately 6 lbs of stabilizer to the water,the CYA is reading 40PPM.I also found the info on your website that tells me not to count on the SWG to raise the chlorine level to shock values on it's own,it needs help.So i used the levels the pool calculated suggested and dumped 9 gallons of 6% bleach in the depend for 27000 gallons of water.Two hours later,FC is still at .5. I checked this with a Taylor K2005 test kit with all new reagents.
Total chlorine was pegged high,well above what the tester will register.I do not understand what I am doing wrong here.
Any help would be appreciated.
SLUGGO