Hi - Want to thank this forum ahead of time for all the insight in pool water balancing. Looking for some advice on what to do here to get my FC in the 3 ppm range for my SWG pool
Test results -
Salt - 3.0 ppm
FC - .17
TC - .56
CC - .39
PH - 7.6
TA - 105
CH - 160
CYA - 76
I've read through the pool school and tried shocking the pool with liquid bleach which drastically lowered my CC. I've raised the pool PH to appropriate levels and will have to lower TA with the by aerating. Also raised my CYA up to 76. I do not seem to be able to get my FC up though in the pool with the SWG. I've tried the boost setting to generate chlorine. My guess is that the SWG is working because I am getting some chlorine readings. Any suggestions on what to try next?
Thanks for your help
Test results -
Salt - 3.0 ppm
FC - .17
TC - .56
CC - .39
PH - 7.6
TA - 105
CH - 160
CYA - 76
I've read through the pool school and tried shocking the pool with liquid bleach which drastically lowered my CC. I've raised the pool PH to appropriate levels and will have to lower TA with the by aerating. Also raised my CYA up to 76. I do not seem to be able to get my FC up though in the pool with the SWG. I've tried the boost setting to generate chlorine. My guess is that the SWG is working because I am getting some chlorine readings. Any suggestions on what to try next?
Thanks for your help