- Apr 14, 2013
- 119
- Pool Size
- 20000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
hey there!!
now that my pool is been completely refurbished, filled and set up- (thanks to TFP and Pool School)- i have turned on the pump and i have a junction and two pipes coming out of the pump- one pipe feeds 2 of the jets and it appears the other pipe feeds the 3rd jet- that is the one that isn't working.
the only difference i can see between the two pipes is that one has a check valve on it-
so there are 2 jets working perfectly and moving water around the pool and one of the jets is completely dead as though it has been turned off.
was going to get a plumbers snake and see if there might be something going on in there but i wanted to post something on here because i am a newbie and a bit of a pool"tard"
thanks[attachment=0:219j7ba6]IMG_2405.JPG[/attachment:219j7ba6]
now that my pool is been completely refurbished, filled and set up- (thanks to TFP and Pool School)- i have turned on the pump and i have a junction and two pipes coming out of the pump- one pipe feeds 2 of the jets and it appears the other pipe feeds the 3rd jet- that is the one that isn't working.
the only difference i can see between the two pipes is that one has a check valve on it-
so there are 2 jets working perfectly and moving water around the pool and one of the jets is completely dead as though it has been turned off.
was going to get a plumbers snake and see if there might be something going on in there but i wanted to post something on here because i am a newbie and a bit of a pool"tard"
thanks[attachment=0:219j7ba6]IMG_2405.JPG[/attachment:219j7ba6]