Hello everybody,
Could use some help with plumbing project. Current plumbing has several problems with air leaks, multiple 90 degree, broken ball ears etc.. thought I'd clean up since will be adding SWG and Jandy Valves.
Here's the problem. Two vertical 2" for skimmer and main drain, one each. Also, two vertical 2" pipes for return to 8 floor sweeps and 6 wall outlets. Pool shape is Kidney at 12500 gals.
Plan is to add 3 Jandy valves each 3 port neverlube. One for skimmer, one for return and one between pump and filter for drain and future add on's. Just not enough space between the two vertical 2" pipes to add Jandy Valves on top with 90's elbow. So I need suggestions on how to do this correctly. Have included photo's so you may get picture of what I would like to do. Also would like to change position of pump so that flow to pump is more direct from two verticals to pump intake. Same for filter to return lines. Also think that plumbing from pool to pad is 1.5" then all plumbing on pad is 2". If you can help out, I would be most grateful.
Thank you. Jim
Could use some help with plumbing project. Current plumbing has several problems with air leaks, multiple 90 degree, broken ball ears etc.. thought I'd clean up since will be adding SWG and Jandy Valves.
Here's the problem. Two vertical 2" for skimmer and main drain, one each. Also, two vertical 2" pipes for return to 8 floor sweeps and 6 wall outlets. Pool shape is Kidney at 12500 gals.
Plan is to add 3 Jandy valves each 3 port neverlube. One for skimmer, one for return and one between pump and filter for drain and future add on's. Just not enough space between the two vertical 2" pipes to add Jandy Valves on top with 90's elbow. So I need suggestions on how to do this correctly. Have included photo's so you may get picture of what I would like to do. Also would like to change position of pump so that flow to pump is more direct from two verticals to pump intake. Same for filter to return lines. Also think that plumbing from pool to pad is 1.5" then all plumbing on pad is 2". If you can help out, I would be most grateful.
Thank you. Jim